Authorized IT & Cybersecurity Partner — Chennai · Bangalore · Hyderabad · Kochi · Coimbatore +91 98405 87602  ·  contact@invitty.com
OEM Knowledge Base · Networking

Cisco: products, models, specifications and licensing

Cisco supplies networking, security, observability and collaboration products to enterprises, service providers and public-sector bodies.

Checked against Cisco’s official website6 product families · 31 models & editionsUpdated every 10 days

Cisco at a glance

Cisco supplies networking, security, observability and collaboration products to enterprises, service providers and public-sector bodies. In its own words it builds the infrastructure organisations need for the AI era. For a typical business the portfolio splits into a few practical groups. Catalyst switches and wireless access points form the campus and branch network and are managed through Catalyst Center or Cisco's cloud tools. Meraki is the cloud-managed line, where firewalls and SD-WAN appliances (MX), switches (MS) and access points (MR) are configured from a single web dashboard. Secure Firewall appliances run Cisco's threat-defence or ASA software and cover branch, campus and data-centre sizes. Each group has its own management system and licence model, so a switch, an access point and a firewall should be sized and licensed separately even when they share the Cisco name. Cisco has been moving switching and Meraki hardware toward subscription licences, with the same Catalyst hardware able to run either on-premises or cloud-managed operation.

Cisco products and models

Specifications are the vendor’s published datasheet figures. Real-world performance depends on enabled features, traffic and configuration.

Secure Firewall

Next-generation firewall appliance

Secure Firewall is Cisco's range of firewall appliances for branch offices, campuses and data centres. The 1200 series covers compact desktop and 1U branch units, the 3100 series suits campus edge and mid-size sites, and the 4200 series is built for high-throughput data-centre use in a single rack unit. The 3100 series data sheet publishes separate figures for the ASA and Firepower Threat Defense (FTD) software images, so buyers should check which image they intend to run before comparing numbers. Management can be done on the device, through a firewall management centre, or from the cloud.

Best for: Organisations that need a dedicated inspection firewall with IPS and VPN at branch, campus or data-centre scale.

Key features

  • Choice of ASA or Firepower Threat Defense software on the 3100 series
  • Stateful firewall with application visibility and intrusion prevention
  • IPsec VPN termination
  • TLS decryption capacity published per model
  • 1200 series positioned for branches with SD-WAN use
  • 4200 series delivered in a single rack unit

Models and specifications

Model / editionSuited toFirewall throughputIPS throughputIPsec VPN throughputDecryption throughputStateful firewall throughput (ASA)FW+AVC+IPS throughput (FTD)
Secure Firewall 1210Branch office (desktop)6 Gbps6 Gbps5 Gbps1 Gbps––
Secure Firewall 1220Branch office (desktop)9 Gbps9 Gbps10 Gbps1.5 Gbps––
Secure Firewall 1230 and 1240Branch office (rackmount)13-18 Gbps9-12 Gbps13-18 Gbps2.5-3.2 Gbps––
Secure Firewall 1250Enterprise branch (rackmount)24 Gbps18 Gbps22 Gbps4.1 Gbps––
Secure Firewall 3105Campus edge––––10.0 Gbps10 Gbps
Secure Firewall 3110Campus edge––––18.0 Gbps17 Gbps
Secure Firewall 3120Campus edge––––22.0 Gbps21 Gbps
Secure Firewall 3130Campus and data centre edge––––42.0 Gbps38 Gbps
Secure Firewall 3140Campus and data centre edge––––49.0 Gbps45 Gbps
Secure Firewall 4215Data centre65 Gbps65 Gbps45 Gbps20 Gbps––
Secure Firewall 4225Data centre80 Gbps80 Gbps80 Gbps30 Gbps––
Secure Firewall 4245Data centre140 Gbps140 Gbps140 Gbps45 Gbps––

Licensing: Hardware is bought with a software image (ASA or FTD) and term-based security subscriptions for features such as intrusion prevention and URL filtering; the 3100 data sheet and product pages should be checked for the exact bundles available for each model.

Source: cisco.com (official site)

Catalyst 9300 switches

Stackable enterprise access switch

The Catalyst 9300 family is Cisco's stackable switch line for campus and branch access. The data sheet describes modular-uplink models (C9300X and C9300) and fixed-uplink models (C9300L and C9300LM), with uplink speeds from 1G up to 100G depending on the module. Models cover data-only, PoE and Cisco UPOE+ ports, and multigigabit copper ports for Wi-Fi access points. Switches stack with up to eight members, with the stack bandwidth depending on the series. Software is IOS XE, and the switches can be run on-premises or managed from the Meraki dashboard.

Best for: Campus and branch access layers that need stacking, PoE for access points and a choice of uplink speeds.

Key features

  • Modular uplinks on C9300X and C9300; fixed uplinks on C9300L and C9300LM
  • StackWise-1T on C9300X, StackWise-480 on C9300, StackWise-320 on C9300L and LM
  • Up to 8 stack members and 448 access ports per stack
  • Cisco UPOE+ and multigigabit models
  • Power supply options change the available PoE budget
  • Runs Cisco IOS XE

Models and specifications

Model / editionSuited toPortsStackingPoE budgetSwitching capacityUplinks
C9300X-48HXCampus access, multigigabit UPOE+48x 10G Multigigabit, Cisco UPOE+StackWise-1T (1 Tbps)590 W with default 1100 W supply, up to 3290 W with 1900 W supplies––
C9300X-48TXCampus access, multigigabit data48x 10G Multigigabit, dataStackWise-1T (1 Tbps)–1,760 Gbps (2,760 Gbps with stacking)–
C9300X-24YAggregation and fibre access24x 25G/10G/1G SFP28StackWise-1T (1 Tbps)–2,000 Gbps (3,000 Gbps with stacking)–
C9300-48TCampus access48 data portsStackWise-480 (480 Gbps)–256 Gbps (736 Gbps with stacking)–
C9300L-48T-4XBranch and campus access48 data portsStackWise-320 (320 Gbps)–176 Gbps (496 Gbps with stacking)4x 10G/1G fixed
C9300LM-48UX-4YCampus access, UPOE48 Cisco UPOE ports (8x 10G Multigigabit, 40x 1G)StackWise-320 (320 Gbps)–440 Gbps (760 Gbps with stacking)4x 25G fixed

Licensing: Cisco's unified switching licences (Switching Essentials or Advantage) are bought through the Cisco Networking Subscription or an Enterprise Agreement, with a standard 36-month minimum for new subscriptions. Cisco DNA subscriptions are also listed, in 3, 5 or 7 year terms, and Meraki Advanced or Enterprise subscriptions apply when the switch is cloud-managed.

Source: cisco.com (official site)

Catalyst 9200 switches

Stackable entry-level enterprise access switch

The Catalyst 9200 series is the entry tier of the Catalyst 9000 access range. It comes as modular C9200 models with field-replaceable uplinks, fixed-uplink C9200L models, and compact fanless C9200CX models for desks, classrooms and wiring-closet-free sites. Port counts of 24 and 48 are available with data-only, PoE+ and multigigabit options. The C9200 stacks at 160 Gbps and the C9200L at 80 Gbps, in each case with up to eight members. The compact CX models cannot be stacked. Software requires Cisco IOS XE and a Smart Account for licensing.

Best for: Smaller campuses and branches that want Catalyst software and stacking without the higher-end uplink options.

Key features

  • Modular C9200, fixed-uplink C9200L and compact fanless C9200CX variants
  • StackWise-160 (C9200) and StackWise-80 (C9200L), up to 8 members
  • Up to 384 access ports per stack
  • PoE+ models with budgets that double with a second power supply
  • Multigigabit PXG variants
  • Mixed C9200 and C9200L stacks are not supported

Models and specifications

Model / editionSuited toPortsSwitching capacityStackingPoE budgetUplinks
C9200-24TSmall branch access24 data128 Gbps (288 Gbps stacked)StackWise-160––
C9200-48PBranch access with PoE+48 PoE+176 Gbps (336 Gbps stacked)StackWise-160740 W (1 PSU) / 1440 W (2 PSU)–
C9200L-48P-4XBranch access with PoE+48 PoE+176 Gbps (256 Gbps stacked)StackWise-80740 W (1 PSU) / 1440 W (2 PSU)4x 1/10G
C9200CX-12P-2X2GCompact fanless12 PoE+68 GbpsNot supported240 W–

Licensing: Add-on licences are required with the switch and are managed through a Smart Account. The data sheet lists Cisco Switching Essentials and Advantage through the Cisco Networking Subscription or an Enterprise Agreement, with a standard 36-month minimum for new subscriptions, and DNA subscriptions in 3, 5 or 7 year terms. Evaluation licences run for 90 days.

Source: cisco.com (official site)

Meraki MX security and SD-WAN appliances

Cloud-managed security and SD-WAN appliance

Meraki MX appliances combine a firewall, VPN and SD-WAN functions in a unit that is configured from the Meraki dashboard rather than a local console. The datasheets published on Meraki's documentation site cover desktop models such as the MX75 and rack-mount models such as the MX85, MX95 and MX105. Throughput is quoted as stateful firewall, advanced security and VPN figures. Each device needs an active cloud licence to remain managed.

Best for: Multi-site organisations that want firewall and SD-WAN for many branches managed from one cloud dashboard.

Key features

  • Managed from the Meraki cloud dashboard
  • Stateful firewall with advanced security detection
  • Site-to-site VPN
  • Several WAN uplinks per model
  • Dedicated management port and USB 3.0 port
  • Hardware warranty is tied to the device, support is included with the licence

Models and specifications

Model / editionSuited toStateful firewall throughputNext-generation firewall (detection) throughputMax site-to-site VPN throughputSite-to-site VPN tunnelsAdvanced security throughputMax VPN throughput
MX75Small to mid branch (desktop)1 Gbps1 Gbps1 Gbps75––
MX85Small to medium branch (rack mount)1 Gbps––2001 Gbps1 Gbps
MX95Mid-size branch (rack mount)3 Gbps–––2 Gbps2.5 Gbps
MX105Large branch (rack mount)5 Gbps–––2.5 Gbps3.5 Gbps

Licensing: Every Meraki device needs a cloud licence to be managed, under a Subscription or Co-Term model. MX units use Essential and Advantage tiers under subscription; an MX warm-spare pair needs one licence.

Source: documentation.meraki.com (official site)

Meraki MS switches

Cloud-managed access switch

Meraki MS switches are managed from the same cloud dashboard as Meraki firewalls and access points. The MS390 is a stackable access switch in 24 and 48-port versions with data, PoE, UPoE and multigigabit options and modular uplinks. Cisco's switching comparison pages also place the MS130 and MS150 in the access tier. Meraki's documentation notes that the MS130, MS150, MS390 and Catalyst 9300 need the same licence tier across the organisation.

Best for: Sites that want switch configuration, monitoring and firmware handled from the cloud dashboard.

Key features

  • Cloud dashboard management
  • Modular uplinks on the MS390 (2x 40G, 4x 10G or 8x 10G modules)
  • Two stacking ports on each MS390
  • PoE, UPoE and 802.3bt variants
  • Multigigabit models up to 10G
  • Cloud licence required per switch

Models and specifications

Model / editionSuited toPortsPoE budgetSwitching capacityStacking bandwidth
MS390-24P-HWAccess, PoE24 x 1GbE RJ45445 W / 720 W with secondary PSU208 Gbps480 Gbps
MS390-48P-HWAccess, PoE48 x 1GbE RJ45437 W / 1152 W with secondary PSU256 Gbps480 Gbps
MS390-48U-HWAccess, UPoE/802.3bt48 x 1GbE RJ45822 W / 1800 W with secondary PSU256 Gbps480 Gbps
MS390-48UX2-HWMultigigabit access48 x 100M/1G/2.5G/5G RJ45645 W / 1745 W with secondary PSU640 Gbps480 Gbps

Licensing: Each switch needs an active Meraki cloud licence. Under Co-Term and per-device models, switches use a licence per hardware model; under Subscription the tiers are Essential and Advantage. A warm-spare switch pair needs two licences.

Source: documentation.meraki.com (official site)

Meraki MR wireless access points

Cloud-managed Wi-Fi access point

Meraki MR access points are managed from the Meraki dashboard. The MR57 is a Wi-Fi 6E model with 4x4 client radios on 2.4, 5 and 6 GHz, plus a separate scanning and security radio and a Bluetooth Low Energy radio. The MR46 and MR36 datasheets are also published on the same documentation site. Under Meraki licensing, wireless uses one licence class across all MR models.

Best for: Offices, schools and retail sites that want Wi-Fi managed centrally from a cloud dashboard.

Key features

  • Cloud dashboard management
  • Wi-Fi 6E with a software-configurable flex radio (MR57)
  • Dedicated scanning and security radio
  • Bluetooth Low Energy radio
  • 2x 100/1000/2.5G/5G ports (MR57)
  • Powered by PoE+ or 802.3bt

Models and specifications

Model / editionSuited toWi-Fi standardClient radiosMax data rate (aggregate)Ethernet portsPower
MR57High-density Wi-Fi 6E802.11ax (Wi-Fi 6E)4x4 MIMO, 2.4 GHz, 5 GHz and 6 GHz7.78 Gbps2x 100/1000/2.5G/5G BASE-TPoE+ (802.3at) or 802.3bt, 30-40 W

Licensing: Every access point needs a cloud licence to remain managed. Wireless and camera products use a single licence class covering all models in the line.

Source: documentation.meraki.com (official site)

Cisco licensing and subscriptions

Cisco licensing differs by product group. Catalyst switches use Cisco's unified switching licences (Switching Essentials or Advantage) via the Cisco Networking Subscription or an Enterprise Agreement, with a standard 36-month minimum for new subscriptions. Older Cisco DNA subscriptions are listed in 3, 5 or 7 year terms and must match the perpetual Network Essentials or Network Advantage tier. Meraki hardware needs a cloud licence per active device: the Subscription and Co-Term models are open to all customers, and Per-Device Licensing is limited to existing customers. An organisation can use only one Meraki licensing model. Secure Firewall appliances are sold with term-based security subscriptions on top of the hardware.

Edition / bundleWhat it includes
Switching Essentials / AdvantageUnified switching licence tiers for Catalyst switches, bought through the Cisco Networking Subscription or an Enterprise Agreement
Cisco DNA Essentials / AdvantageSubscription tiers in 3, 5 or 7 year terms, paired with perpetual Network Essentials or Network Advantage
Meraki Essential / AdvantageSubscription tiers for most Meraki product families including MX
Meraki Enterprise / AdvancedCo-Term and cloud-managed Catalyst tier names; term lengths of 1, 3, 5, 7 or 10 years are listed on the Catalyst 9300 data sheet

Licensing notes

  • Only active devices in a Meraki network need a licence; devices in inventory do not.
  • Under Co-Term and Per-Device Licensing, Meraki hardware stops passing traffic if the organisation is out of compliance.
  • A Meraki licence includes support; hardware warranty is tied to the hardware itself.
  • An MX warm-spare pair needs one licence, while an MS pair needs two.
  • Co-Term organisations cannot mix licence tiers.

Cisco solutions

Multi-site branch networking

Branches can be built on Meraki MX appliances, MS switches and MR access points managed from one dashboard. Cisco documents each product's licence class separately, so the licence plan should be set per device type.

Uses: Meraki MX security and SD-WAN appliances, Meraki MS switches, Meraki MR wireless access points

Campus access networking

Catalyst 9300 and 9200 switches provide wired access with PoE for access points and phones. The 9300 offers modular uplinks and larger stacks of bandwidth; the 9200 suits smaller sites. Both can be stacked up to eight members.

Uses: Catalyst 9300 switches, Catalyst 9200 switches

Perimeter and data-centre firewalling

Secure Firewall 3100 and 4200 series appliances inspect traffic at campus and data-centre edges, publishing firewall, IPS, VPN and decryption figures per model.

Uses: Secure Firewall

Cloud-managed wireless

Meraki MR access points, such as the Wi-Fi 6E MR57, are configured from the cloud dashboard and powered over PoE by a switch from the Catalyst or Meraki MS range.

Uses: Meraki MR wireless access points, Meraki MS switches

What’s new with Cisco

Product launches, licence changes and lifecycle notices from the last 12–18 months, newest first.

  1. Security

    Meraki security hardening advisory updated to final

    Cisco's October 2026 Meraki hardening advisory, rated critical at CVSS 9.6, covers MR, MS, MX, MG and MV products and Campus Gateways. It says there are no workarounds and recommends upgrading to the fixed software versions.

    Official source
  2. Security

    Cisco Meraki Security Hardening Release: October 2026

    Cisco published fixes for vulnerabilities found in internal testing across Meraki wireless, switching, security appliance and camera products. Cisco says they are not known to be actively exploited.

    Official source
  3. Lifecycle

    Meraki MX67C and MX68CW end-of-sale set for 27 November 2026

    Cisco's September networking roundup gives 27 November 2026 as end-of-sale for these two MX models, with end of support on 30 November 2031.

    Official source
  4. Product

    Catalyst 9400 and 9606 join cloud management in Meraki Dashboard

    The modular Catalyst 9400 and 9606 can be managed in the Meraki Dashboard in Device Configuration mode, alongside the C9610, keeping their existing configuration.

    Official source
  5. Product

    Catalyst C9550 core switches and Catalyst Center DN4 appliances orderable

    The C9550-32C and C9550-64C-XL campus core switches with up to 100G QSFP ports, and DN4 Catalyst Center appliances replacing the third-generation units, are now orderable. The third-generation appliances have an end-of-sale announced for 1 July 2026.

    Official source

Cisco: frequently asked questions

What is the difference between Meraki and Catalyst switches?

Meraki MS switches are designed to be managed from the Meraki cloud dashboard. Catalyst switches run IOS XE and are normally managed on-premises or through Catalyst Center. Cisco also lists Meraki licensing for the Catalyst 9300, and its September 2026 roundup says several Catalyst models can be cloud-managed, so the choice is partly about management style.

How are Meraki devices licensed?

Every Meraki device needs a cloud licence to be managed. There are three models: Subscription, Co-Term and Per-Device Licensing, though Per-Device Licensing is limited to existing customers. An organisation can use only one model, and only active devices in networks need a licence.

What happens if a Meraki licence expires?

Under Co-Term and Per-Device Licensing, Meraki states that hardware becomes non-operational when the organisation is out of compliance: configuration changes are blocked and traffic stops passing to the Internet. Subscription compliance behaviour is covered in a separate Meraki article.

What do the Secure Firewall 3100 throughput figures mean?

The data sheet lists separate tables for the ASA and Firepower Threat Defense (FTD) software images. Stateful firewall throughput comes from the ASA table, while FW+AVC+IPS and IPsec VPN figures are FTD measurements. Check which software image you plan to run before comparing models.

How many Catalyst 9300 switches can be stacked?

Up to eight members and up to 448 access ports per stack. C9300X models stack at StackWise-1T (1 Tbps), C9300 at StackWise-480 (480 Gbps) and C9300L and LM at StackWise-320 (320 Gbps). A mixed C9300X and C9300 stack runs at StackWise-480 speeds.

Can Catalyst 9200 switches be stacked together with 9200L models?

No. The data sheet states that mixed C9200 and C9200L stacking is not supported, and the compact C9200CX models cannot be stacked. Modular C9200 models stack at 160 Gbps and fixed-uplink C9200L models at 80 Gbps, in each case up to eight members.

Which Meraki MX models are reaching end-of-sale?

Cisco's September 2026 networking roundup states that the MX67C and MX68CW reach end-of-sale on 27 November 2026, with end of support on 30 November 2031. Check Cisco's end-of-sale notice for the recommended successor.

Do Meraki security advisories affect all Meraki products?

The October 2026 hardening advisory lists Meraki MR access points, MS switches, MX appliances, MG cellular gateways and MV cameras, plus Campus Gateways, as affected regardless of configuration. Cisco says there are no workarounds and recommends upgrading to the fixed versions it lists.

Sources

Compiled from Cisco’s own website on 22 November 2026. Product names and trademarks belong to their owners. Always confirm the final model and licence against the vendor’s current datasheet before ordering.